top of page

VISUAL INSPECTIONS

A visual inspection of an electrical installation is a basic check to identify any visible signs of defects, damage or deterioration.
No circuit testing will be undertaken, so your electricity will likely
remain on during the inspection.


The electrician will need to access to as much of the property as possible. The report will typically take around 1-4 hour to
complete depending on the size of the installation.


Notes will be taken by the electrician as part of the visual
inspection and a Visual Inspection Report (VIR) will be issued to the
person ordering the works on completion.


The Visual Inspection report will record a number of observations
and recommendations and provide an overall summary of the
condition of the installation.

A visual inspection of electrical equipment and installations is ideal for electrical installations that cannot be de-energised.

​

​The aim is to identify any potential hazards and ensure safety.

​

It DOES NOT replace the need to carry out an Electrical Installation Condition Report (EICR) and should be used as an interim inspection before the next EICR inspection is due.

It can help ensure that the installations meet regulations and are safe to use also. 

​

During the inspection, our qualified engineer will look for signs of damage, wear,

or non-compliance with BS7671 regulations. They'll examine: 

  • Wiring systems: Check for breaks, cracks, or signs of overheating 

  • Accessories: Such as switches, sockets, and light fittings 

  • Distribution boards: Including the condition of circuit breakers and fuses 

  • Earthing and bonding: Ensure suitable connections and the presence of protective devices 

  • Other areas: Such as the electrical intake, consumer unit, fixtures and fittings, and the condition of wires and cables.

  • They'll also check that electrical leads are undamaged, plugs and sockets are intact, and that extension leads are being used correctly. 

 

20200615_101820.jpg
20230811_091323_edited.jpg

Below is a check list of the things you can expect to be looked at
during a visual inspection.

  • Distribution Board(Consumer Unit)

  • Sockets

  • Plugs

  • Light fittings

  • Light switches

  • Electrical cables or leads

  • Earthing and bonding

  • Extension leads

  • Kitchen safety

  • Bathroom safety

  • Signs of wear and tear

  • Visible signs of burning/scorching

  • RCD protection around the home

bottom of page